The surrounding area is zoned 100 AG and AG-II-100
The purpose of the proposed project is to replace the existing bridge (51C-017). The proposed new bridge will be a single-span pre-cast and pre-stressed concrete Bulb-Tee Girder Bridge. The new structure will accommodate one 12-foot traffic lane and a 5-foot wide shoulder in each direction. With the proposed traffic barriers, the overall bridge deck width is proposed to be 36 feet, 10 inches. The proposed bridge length is 160 feet. The new abutments will be founded on cast-in-place concrete piles and set back sufficiently from the tops of the existing incised creek banks to provide additional protection against potential future erosion of the banks. Construction will be done from the tops of banks to avoid disturbance to creek banks and the riparian zone.
Air Resources Board, Transportation ProjectsCalifornia Air Resources BoardCalifornia Department of ConservationCalifornia Department of Fish and Wildlife, South Coast Region 5California Department of Parks and RecreationCalifornia Department of Transportation, District 5California Highway PatrolCalifornia Native American Heritage CommissionCalifornia Regional Water Quality Control Board, Central Coast Region 3California State Lands CommissionDepartment of Toxic Substances ControlDepartment of Water ResourcesOffice of Historic PreservationResources Agency
The document was originally posted before CEQAnet had the capability to host attachments for the public.
To obtain the original attachments for this document, please contact the lead agency at the contact information listed above.
You may also contact the OPR via email at firstname.lastname@example.org or via phone at (916) 445-0613.