The county proposes to replace the existing bridge structure on an improved horizontal alignment with a 2-lane structure that would meet current design standards. The new bridge would be approx 5.5-ft wider than the existing bridge to accommodate two 11-ft lanes and 5-ft shoulders on each side of the bridge. The new structure would also be approx 16-ft longer. The bridge approaches and roadway profile at the beginning and ending of the bridge would be raised approx 1-ft to meet the hydraulic requirements associated with the creek. In addition, the creek embankment would be covered with rock slope protection to mitigate scour within the limits of the bridge approach fills.
Air Resources Board, Transportation ProjectsCalifornia Department of Conservation (DOC)California Department of Fish and Wildlife, Central Region 4 (CDFW)California Department of Parks and RecreationCalifornia Department of Transportation, District 10 (DOT)California Native American Heritage Commission (NAHC)California Regional Water Quality Control Board, Central Valley Fresno Region 5 (RWQCB)California State Lands Commission (SLC)Department of Toxic Substances ControlDepartment of Water ResourcesOffice of Emergency Services, CaliforniaOffice of Historic PreservationResources AgencyState Water Resources Control Board, Division of Drinking WaterCentral Valley Flood Protection Board
The document was originally posted before CEQAnet had the capability to host attachments for the public.
To obtain the original attachments for this document, please contact the lead agency at the contact information listed above.
You may also contact the OPR via email at email@example.com or via phone at (916) 445-0613.