Solar Water Heating for the Residential, Commercial and Industrial Sectors - REVISED
Summary
SCH Number
2018098322
Public Agency
California Energy Commission
Document Title
Solar Water Heating for the Residential, Commercial and Industrial Sectors - REVISED
Document Type
NOE - Notice of Exemption
Received
Posted
9/14/2018
Document Description
The contractor will conduct a pilot scale demonstration and test the previously developed aluminum mini-channel solar water heating technology on residential/commercial building types and climate zones in CA that have been identified by the contractor as having the greatest potential for cost and energy savings. The contractor will then identify pathways to the marketplace and develop a business plan that will facilitate the technology's introduction into the marketplace. The contractor will also design and optimize copper mini-channel solar thermal technology for potential use in commercial and industrial applications.
The optimized design will then be tested to determine if useable industrial grade steam can be produced and determine what the applicable ideal commercial/industrial scenarios would be. The contractor will then identify commercial/industrial sites for demonstrating the optimized copper mini-channel solar technology. The demonstration will attempt to prove the feasibility, energy savings, and cost effectiveness of the technology for industrial processes. The contractor will also identify pathways to the marketplace and develop a business plan that will facilitate the technology's introduction into the marketplace.
Contact Information
Name
Amir Ehyai
Agency Name
California Energy Commission
Contact Types
Lead/Public Agency
Phone
Location
Counties
Los Angeles
Other Location Info
9550 Donna Ave, Northridge
8825 Woodman Ave, Arleta
Notice of Exemption
Exempt Status
Categorical Exemption
Type, Section or Code
15301, 15303, 15306, 15311
Reasons for Exemption
This project will involve the installation of solar collectors, hot water storage tanks and the associated plumbing and control devices at site addresses that will be determined during the project. The project will be installed on the rooftops of existing residential, commercial and/or industrial buildings and will cover a roof surface of less than 1000 sf on each building.
The proposed buildings have not yet been determined and will be determined during the project based on availability, site solar conditions, and technical feasibility. The properties that the project will be located at are likely to be zoned for residential, commercial and/or industrial use.
Disclaimer: The document was originally posted before CEQAnet had the capability to host attachments for the public. To obtain the original attachments for this document, please contact the lead agency at the contact information listed above. You may also contact the OPR via email at state.clearinghouse@opr.ca.gov or via phone at (916) 445-0613.