The project is located along Buck Ave at Alamo Creek, between Alamo Dr and Edgewood Dr, in the city of Vacaville. The project would remove the existing Buck Ave Bridge and the northerly and southerly pedestrian bridges over Alamo Creek and construct a single bridge of increased width that meets structural and hydraulic design standards. The new bridge would be a single-span, cast-in-place, pre-stressed concrete slab bridge with a length of approx 54 ft and a width of approx 54 ft, 6 in. The roadway approaches would conform to the existing roadway approx 150 ft east and approx 180 ft west of the bridge. The new bridge would accommodate two 12-ft wide travel lanes, two 8-ft wide shoulders, curbing, gutters and sidewalk. Utilities would be relocated to conform to the new bridge.
Water QualityTraffic/CirculationToxic/HazardousSoil Erosion/Compaction/GradingPublic ServicesNoiseBiological ResourcesArchaeologic-HistoricAir Quality
Reviewing Agencies
Regional Water Quality Control Bd., Region 5 (Sacramento)Air Resources Board, Transportation ProjectsCalifornia Department of Parks and RecreationCalifornia Highway PatrolCaltrans, District 4Caltrans, Division of AeronauticsCentral Valley Flood Protection BoardDelta Protection CommissionDelta Stewardship CouncilDepartment of Fish and Wildlife, Region 3Department of Water ResourcesNative American Heritage CommissionResources AgencyState Water Resources Control Board, Division of Water Quality
