North Kern Water Storage would install Water Delivery Improvement control and monitoring instruments at 112 District-owned wells and water level sensing equipment at 14 remote terminal unit (RTU) locations within the District. The WDI equipment installation includes the following: magnetic flowmeters, water quality sensors, telemetry units, evapotranspiration stations (ET) stations and water level sensors.
Construction activities associated with the installation of the WDI equipment would include the installation of conduit for field instrumentation and wiring, and a 4x4 foot concrete support pad. The trench for conduit would be approximately 36 inches deep, up to 12 inches in width, and extend up to 30 feet in length. Each RTU location would also include a 35 foot power pole, solar requipment, a SCADAPack controller to monitor the local water levels and a 900 MHz radio to communicate data back to the main office. The WDI project would be implemented over a 3 year period, starting in March of 2018.
The Water Delivery improvements consists of construction and location of limited numbers of new, small structures; installation of small new equipment in small structures; and the conversion of existing small structures where only minor modifications are made to the exterior of the structure (CEQA Guidelines, Article 19, Section 15303)
The document was originally posted before CEQAnet had the capability to host attachments for the public.
To obtain the original attachments for this document, please contact the lead agency at the contact information listed above.
You may also contact the OPR via email at email@example.com or via phone at (916) 445-0613.