The project consists of extending a 9' wide steel culvert to prevent erosion and allow fire truck access in case of emergency. The culvert will be extended 7 feet on the upstream side, and 20 feet on the downstream side. The existing roadway will be widened by 18 inches on each side, using native fill around the culvert, and approximately 20 cubic yards (CY) of 6" to 12" rip rap at the culvert inlet and outlet.
Minor alterations to land and water and will not remove any healthy, mature trees.
The document was originally posted before CEQAnet had the capability to host attachments for the public.
To obtain the original attachments for this document, please contact the lead agency at the contact information listed above.
You may also contact the OPR via email at firstname.lastname@example.org or via phone at (916) 445-0613.