Dumpster Backstop

Dumpster Backstop

The project will be at post #2 dumpster backstop it will include removal of old fence fabric and removal of existing posts which are rotten and falling over. The posts will be pulled out with heavy equipment it is possible that if a post breaks off at the ground there will be some minor digging up to 3' to remove the post. After the posts are removed there will be grading done at the existing work site to level the area to prepare for installation once the area is level we will be reinstalling the dumpster backstop in the same location using 29 4 L/2" x 10' Galvanized steel posts 8'apart that will be driven into the ground approx 7' deep which will leave 3' out of the ground that will be done with our post master attachment to the T300 skid steer there will be no digging involved to install the posts. Then there will be 29 4"x12' that will be installed inside the 4 7/2" post sleeved which will have a 6'overlap there will be a collar barrier. There will be a top middle and bottom brace that is 77 /8" galvanized pipe that will be panels. The backstop will be 208' in length with two 8'wings. This backstop helps prevent trash from blowing into the dunes which will help preserve our natural resources.

San Luis Obispo