Inclinometer Installation at San Vicente Dam (N0406)
Summary
SCH Number
2016108103
Public Agency
San Diego County Water Authority
Document Title
Inclinometer Installation at San Vicente Dam (N0406)
Document Type
NOE - Notice of Exemption
Received
Posted
10/10/2016
Document Description
The project consists of drilling a 4-inch diameter, 120 feet deep vertical hole from the crest of San Vicente dam in order to install tilt measuring devices to monitor movement of the dam. After the hole is drilled, a fiberglass casing pipe will be installed to house and position the measuring devices. Grout will be placed around the casing pipe to lock it in place. A second 120 feet deep boring will be drilled nearby for future down-hole surveys of the dam using camera equipment. Both boring locations will be covered by a steel plate bolted to the crest slab. Conduit will be installed from the instrument bore hole, along the upstream parapet wall to the crest control building. Instrumentation wires will be connected to an existing process control cabinet for data monitoring and recording.
Contact Information
Name
Mark Tegio
Agency Name
San Diego County Water Authority
Contact Types
Lead/Public Agency
Phone
Location
Counties
San Diego
Notice of Exemption
Exempt Status
Categorical Exemption
Type, Section or Code
S:15301 C:1
Reasons for Exemption
The project is the alteration of existing public water facilities, consisting of the installation of measurement instruments.
Disclaimer: The document was originally posted before CEQAnet had the capability to host attachments for the public. To obtain the original attachments for this document, please contact the lead agency at the contact information listed above. You may also contact the OPR via email at state.clearinghouse@opr.ca.gov or via phone at (916) 445-0613.