Permit No. 19316 – County of Butte, Department of Public Works – Bridge Replacement
6 Documents in Project
Summary
SCH Number
2015102060
Lead Agency
Butte County
Document Title
Permit No. 19316 – County of Butte, Department of Public Works – Bridge Replacement
Document Type
NOD - Notice of Determination
Received
Posted
4/30/2020
Document Description
Approval of Permit No. 19316, under California Code of Regulations, Title 23, Section 6, for work within an adopted plan of flood control, within a Regulated Stream (Table 8.1; Title 23, Div. 1, Article 8): To remove the Butte Creek Bridge and Butte Creek Overflow Bridge on Midway Road and replace them with a single cast-in-place posttensioned bridge (approximately 1400-foot long by 43-foot wide) supported on reinforced concrete abutments founded on driven piles and cast-in-drilled-hole intermediate piles in the same alignment as the existing bridges. The project also includes rock slope protection along the banks for the entire width and approximately 40 feet upstream and downstream of the bridge. Approximately 310 cubic yards of rock will be discharged below the Ordinary High Water Mark within Butte Creek. Additionally, the project includes a single box culvert (20-foot wide and 40-foot long) over Butte Creek Overflow area, located approximately 150 feet west of the main bridge which is intended to preserve access to agricultural fields.
Contact Information
Name
Itzia Rivera
Agency Name
Central Valley Flood Protection Board (CVFPB)
Contact Types
Lead/Public Agency
Phone
Name
Agency Name
County of Butte, Department of Public Works
Contact Types
Project Applicant
Location
Cities
Durham
Counties
Butte
Other Location Info
The project is located along Midway Road and spans the length of the Butte Creek Channel, approximately 3 miles south from the City of Durham, in Butte County.
Notice of Determination
Approving Agency
CVFPB
Approving Agency Role
Responsible Agency
Approved On
Determinations
(1) The project will have a significant impact on the environment
No
(2a) An Environmental Impact Report was prepared for this project pursuant to the provisions of CEQA
No
(2b) A Mitigated or a Negative Declaration was prepared for this project pursuant to the provisions of CEQA
Yes
(2c) An other document type was prepared for this project pursuant to the provisions of CEQA
No
(3) Mitigated measures were made a condition of the approval of the project
No
(4) A mitigation reporting or monitoring plan was adopted for this project
No
(5) A Statement of Overriding Considerations was adopted for this project
No
(6) Findings were made pursuant to the provisions of CEQA
Yes
Attachments
Notice of Determination
Disclaimer: The Governor’s Office of Planning and Research (OPR) accepts no responsibility for the content or accessibility of these documents. To obtain an attachment in a different format, please contact the lead agency at the contact information listed above. For more information, please visit OPR’s Accessibility Site.