Parks and Recreation, Department of
(California Department of Parks and Recreation)
Dimmick Campground Accessbility Improvements
NOE - Notice of Exemption
Improve select areas of the Paul Dimmick Campground in Navarro River Redwoods State Park to comply with the Americans with Disabilities Act (ADA). Work will:
At 2 campsites:
-Remove existing asphalt parking, bollards, and curbs.
-Excavate up to 9" in depth over an approx. 800 ft area to level for parking and campsites;
-Form and pour 20'x20' parking area in steel reinforced concrete, install wheel stops.
-Construct level campsite areas and outdoor recreation routes using 4"x6" or redwood borders and backfill with approx. 35 yd of class A road base.
-Anchor/install new campsite furnishings.
-Excavate a 20 ft area up to 48" in depth in previously disturbed rock sumps and buried pipe lines to remove and replace 2 water stations and install concrete pads around stations. Existing rock sump areas will be used for placement of new drain boxes.
-Construct an 18"x40ft retaining structure with 4"x6" redwood or local quarry rock. Import and backfill retaining wall with up to 8yds of gravel;
Display Station at Park Entrance:
-Remove existing display, iron ranger, envelope dispenser, and park sign.
-Excavate an area of up to 200ftx12" in depth below grade at the roadway.
-Construct an 18" retaining structure of 4"x6" redwood or local quarry rock. Import and backfill retaining wall with up to 8 yds of gravel.
-Excavate 4 post holes to a 8" diameter x 24" depth and install new display, iron ranger, envelope dispenser and park as necessary.
-Remove existing vault toilet buildings and dispose as appropriate.
-Form and pour an 8'x9x6" slab over existing toilet vault.
-Construct accessible vault building on new slab per provided plans.
-Excavate up to 9"x100ft to level area and 12" in depth for perimeter footing around the vault slab and form and our a 6" slab around building;
-Construct an accessible path of 4"x6" redwood borders and backfilled with up to 8yds of gravel.
Day Use Picnic Area:
-Remove asphalt in 26'x20' area, form and pour new parking 26'x20' area with steel reinforced concrete.
-Excavate 1 post hole to a 8" diameter x 24" depth and install new accessible sign as necessary.
-Construct 2 18'x18' picnic areas and backfill with approx. 12 yds compacted road base.
-Construct a 30' long x5' wide access path with 4"x6" redwood borders backfilled with approx. 12 yds compacted road base.
-Excavate 2, 8"diameter x 24" depth post hole and install a new pedestal BBQ at each site and anchor new tables at each site.