Install Entrance Gates
Summary
SCH Number
2012018009
Public Agency
California Department of Parks and Recreation
Document Title
Install Entrance Gates
Document Type
NOE - Notice of Exemption
Received
Posted
1/3/2012
Document Description
Install a 20' metal gate at Holbrook Grove and a 15' metal gate at the "Marshall Gate" area within John B. DeWitt State Natural Reserve to allow park staff to close the parking area for emergencies and to protect facilities and resources. Work will excavate three, 3' diameter by 4' deep holes with an excavator and two by hand to install 2.5" diameter and 4" diameter gate pipe; approximately ten, 18" x 18" x 3' holes 4' apart to install wood or concrete bollards at The Marshall Gate. All gate will be installed between July 11 and January 31st. No roots greater than 2 inchess will be damaged or severed. Spoils from the gate installation earthwork will be located at least 50 feet from any watercourse, and spread and covered with native duff or similar native materials. A containment barrier will be in place if concrete is mixed within 50 feet of a watercourse.
Contact Information
Name
John E. Harris
Agency Name
California Department of Parks and Recreation
Contact Types
Lead/Public Agency
Phone
Email
Location
Notice of Exemption
Exempt Status
Other
Disclaimer: The document was originally posted before CEQAnet had the capability to host attachments for the public. To obtain the original attachments for this document, please contact the lead agency at the contact information listed above. You may also contact the OPR via email at state.clearinghouse@opr.ca.gov or via phone at (916) 445-0613.