Reservoir No. 1 Reconstruction Project

Reservoir No. 1 Reconstruction Project

Burbank Water & power (BWP) proposes to demolish the existing 6.9-million-gallon (MG) Reservoir No. 1 and construct two new, cast-in-place concrete reservoirs with a total storage capacity of approximately 9.5 MG (Reservoir No. 1A with a capacity of approximately 4.8 MG and Reservoir No. 1B with a capacity of approximately 4.7 MG). This design would consist of two conventional reinforced concrete reservoirs constructed within the footprint of the original reservoir. The larger of the two reservoirs, reservoir No. 1A, located on the northwestern half of the site would be rectangular in shape. The smaller of the two reservoirs, Reservoir No. 1B, located on the southeast half of the site would be trapezoidal in shape.

Burbank

Los Angeles

Cal Fire, California Department of Fish and Wildlife, South Coast Region 5 (CDFW), California Department of Parks and Recreation, California Department of Public Health (CDPH), California Department of Transportation, District 7 (DOT), California Highway Patrol, California Native American Heritage Commission (NAHC), California Public Utilities Commission (CPUC), California Regional Water Quality Control Board, Los Angeles Region 4 (RWQCB), Department of Water Resources, Resources Agency, State Water Resources Control Board, Division of Water Rights

Water Facilities (Water Storage Reservoirs)

Other

Aesthetics, Agriculture and Forestry Resources, Air Quality, Cultural Resources, Cumulative Effects, Drainage/Absorption, Flood Plain/Flooding, Geology/Soils, Hazards & Hazardous Materials, Hydrology/Water Quality, Land Use/Planning, Mineral Resources, Noise, Population/Housing, Public Services, Recreation, Schools/Universities, Septic System, Sewer Capacity, Solid Waste, Transportation, Vegetation, Wetland/Riparian, Wildlife