EBRPD has prepared a plan to replenish Crown Beach by placing more than 82,000 cy of sand on the beach in two phases and grading it to conform to the 1988 as-built beach footprint. In addition, the project involves extending the existing sheet pile groin located at the foot of Park Street inland by about 100 ft using either concrete sheet pile construction or a rock rip-rap structure. The purpose of the project is to restore the beach to its 1988 level to provide for continued shoreline erosion control and public recreational opportunities. Sand will be dredged from a commercial mining operation in the SF Bay and deposited on the beach through a pipeline attached to a barge. EBRPD intends to initiate Phase 1 of the project in September 2010 and construction could last up to 6 weeks. Phase 2 would take up to 10 weeks to complete and would being immediately after the complettion of Phase 1 or September 2011.
California Department of Fish and Wildlife, Bay Delta Region 3 (CDFW), California Department of Parks and Recreation, California Department of Transportation, District 4 (DOT), California Highway Patrol, California Native American Heritage Commission (NAHC), California State Lands Commission (SLC), Caltrans, Division of Aeronautics, Department of Water Resources, Resources Agency, San Francisco Bay Conservation and Development Commission (BCDC), Department of Toxic Substances Control
The document was originally posted before CEQAnet had the capability to host attachments for the public.
To obtain the original attachments for this document, please contact the lead agency at the contact information listed above.
You may also contact the OPR via email at email@example.com or via phone at (916) 445-0613.