Visitor Center Vehicle Turn-around and Gate Construction
Summary
SCH Number
2006128040
Public Agency
California Department of Parks and Recreation
Document Title
Visitor Center Vehicle Turn-around and Gate Construction
Document Type
NOE - Notice of Exemption
Received
Posted
12/6/2006
Document Description
Develop a vehicle turn-around at the Lake Oroville State Recreation Area Visitor Center entrance to meet traffic flow requirements during non-business hours. Level an area approximately 60 feet by 80 feet, place approximately 178 cubic yards of 4-inch compacted recycled asphalt, and remove and properly dispose of 200 feet of existing asphalt curb. Relocate gate approximately 100 feet north to allow use of the turn-around and prevent Visitor Center access when the facility is closed. Dig four holes 36 inches deep for gate supports and trench 4 inches wide by 18 inches deep by 100 feet in length for electrical conduit to the relocated gate north and toward the Visitor Center.
Contact Information
Name
Ken Walters
Agency Name
California Department of Parks and Recreation
Contact Types
Lead/Public Agency
Phone
Email
Location
Counties
Butte
Notice of Exemption
Exempt Status
Categorical Exemption
Type, Section or Code
Section 15303, 15304
Reasons for Exemption
Project development of a vehicle turn-around area at an existing public facility, installation of new small structure (gate), and minor alteration in the condition of public land and vegetation which does not involve the removal of healthy, mature, scenic trees. These actions are consistent with the Department of Parks and Recreation's list of exempt activities in accordance with CCR § 15300.4.
Disclaimer: The document was originally posted before CEQAnet had the capability to host attachments for the public. To obtain the original attachments for this document, please contact the lead agency at the contact information listed above. You may also contact the OPR via email at state.clearinghouse@opr.ca.gov or via phone at (916) 445-0613.