Medocino 101 Slope Failure
Summary
SCH Number
2003128240
Public Agency
California Department of Transportation, District 3
Document Title
Medocino 101 Slope Failure
Document Type
NOE - Notice of Exemption
Received
Posted
12/11/2003
Document Description
The projects purpose is to repair a slope failure using a 3-tiered ground anchor system to stabilize the slide by drilling approximately 240 tiebacks 40 to 70 m into the failed cutslope using 3 parallel benches cut along the contours in the side area. Two rows of tieback on each of the three tiers will be drilled from each bench 20 degrees down angle below the horizontal. The tiebacks will extend into competent material beyond the failure plane and achieve there tensile strength from steel strands grounded into each tiseback hole. The ends of the stresses tiebacks will be "locked off" on a shot Crete waler(concrete block that anchors tieback rods into ground surface), which will be constructed along the full length of the bench.
This project will benefit the people of California by maintaining the integrity of this Caltrans facility and reduce the need for future repairs. Actionably, the project repairs will protect the health and safety of the people of California and the visitors to the state.
Contact Information
Name
Michelle Beachley
Agency Name
Department of Transportation, District 3
Contact Types
Lead/Public Agency
Phone
Location
Counties
Mendocino
Notice of Exemption
Exempt Status
Categorical Exemption
Type, Section or Code
class 1
Reasons for Exemption
This Project (Class 1 Section 15301 (d) Article 19 of the State CEQA Guidelines) had been determined not to have a significant effect on the environment and is therefore exempt from the provisions of the CEQA.
Disclaimer: The document was originally posted before CEQAnet had the capability to host attachments for the public. To obtain the original attachments for this document, please contact the lead agency at the contact information listed above. You may also contact the OPR via email at state.clearinghouse@opr.ca.gov or via phone at (916) 445-0613.