Project Test Drilling at the Pulga Bridge (No.12-38)
Summary
SCH Number
1999098227
Public Agency
California Department of Transportation, District 3
Document Title
Project Test Drilling at the Pulga Bridge (No.12-38)
Document Type
NOE - Notice of Exemption
Received
Posted
9/20/1999
Document Description
Foundation test drilling to gather information relevant to the design of the forthcoming seismic retrofit project. A total of four 3-inch diameter rotary wash borings will be drilled though the structure and into bedrock. Two borings will be drilled through the bridge deck with a truck mounted drill rig and through the foundations of the upper bent footings. (footings 1,2,3,4,5,6&11 per as-built plans) to a depth of approximately 50 feet. Each boring will take 3 days. Temporary traffic control and lane closure will be necessary. The remaining two borings will be drilled through the lower pier footings (piers 1 & 2 per as-built plans) to an estimated depth of 100 feet. Each boring at the lower pier footings will take 4 to 7 days to complete. A portable drill rig will be lowered from the bridge deck by crane. Traffic control will be required during use of the crane. All cuttings and fluids (water) will be contained and disposed of off-site.
Contact Information
Name
Chris Quiney
Agency Name
Department of Transportation, District 3
Contact Types
Lead/Public Agency
Phone
Location
Cities
Butte City
Counties
Butte
Notice of Exemption
Exempt Status
Other
Type, Section or Code
CCR 15306(b)(3)
Reasons for Exemption
No cultural resources, hazardous waste or sensitive biological resources are known to exist on the property.
Disclaimer: The document was originally posted before CEQAnet had the capability to host attachments for the public. To obtain the original attachments for this document, please contact the lead agency at the contact information listed above.